Got those ordered,got the spring buckets ordered and got a set of Deaver coils on the way (thank you Jose),just need to mock it all up with the arms!!!
| RumbleGoat Racing http://www.rumblegoatracing.com/forum/ |
|
| Jive turkey http://www.rumblegoatracing.com/forum/viewtopic.php?f=93&t=1298 |
Page 1 of 3 |
| Author: | lurch [ Wed Apr 22, 2009 8:35 pm ] |
| Post subject: | Jive turkey |
Steve found your radius arm wedges. James duff has em http://www.jamesduff.com/eb/suspension_components.html Axle Wedges For the Bronco owner that is swapping front axles, these wedges make it much easier. No need to cut up a good front axle just for parts. These wedges are designed to weld onto a 2 3/4” O.D. tube, just like a factory Early Bronco Dana 44 but are easily modified to fit onto 3” O.D. tubing found on high pinion Dana 44 and Dana 60. Cast with all the correct configurations to fit the inside of a C bushing exactly like original. #5340 Axle Wedges, $85.00 |
|
| Author: | Fozzie [ Sat Apr 25, 2009 5:45 am ] |
| Post subject: | Re: Jive turkey |
| Got those ordered,got the spring buckets ordered and got a set of Deaver coils on the way (thank you Jose),just need to mock it all up with the arms!!!
|
|
| Author: | oltmann [ Sat Apr 25, 2009 7:43 am ] |
| Post subject: | Re: Jive turkey |
Those arms are setup to run 1.25" shank joints. http://www.polyperformance.com/shop/For ... p-388.html Or other spherical joints with a 1.25" shank attached. I re-used the joints on my new suspension. |
|
| Author: | RGRMarketing [ Sat Apr 25, 2009 9:52 am ] |
| Post subject: | Re: Jive turkey |
Let's get that b+-#* burned in...I gots an itch to chase it through the dez and my rig will be done in a week. See ya'll Thursday!! Or sooner 
|
|
| Author: | Fozzie [ Mon Apr 27, 2009 6:04 am ] |
| Post subject: | Re: Jive turkey |
oltmann wrote: Those arms are setup to run 1.25" shank joints. http://www.polyperformance.com/shop/For ... p-388.html Or other spherical joints with a 1.25" shank attached. I re-used the joints on my new suspension. We havn'e officiall decided what to do on the arms,we found a set of stock ones in town,we are going to set where everthing sits and then go from there. I'm so excited I could me Pee!!!!!!  nevermind........
|
|
| Author: | oltmann [ Mon Apr 27, 2009 7:08 am ] |
| Post subject: | Re: Jive turkey |
No worries, just let me know. I may be going to Biggs this week to meet a man about a horse... er something like that.  So I could bring those arms half way. 
|
|
| Author: | lurch [ Mon Apr 27, 2009 12:09 pm ] |
| Post subject: | Re: Jive turkey |
Have you seen these link kits? Made specifically for scouts. http://www.dandcextreme.com/product_sub ... &subcat=19 |
|
| Author: | Fozzie [ Mon Apr 27, 2009 3:18 pm ] |
| Post subject: | Re: Jive turkey |
| No pictures and big $$$$$$ wtf!!!!
|
|
| Author: | Dave W [ Tue Apr 28, 2009 4:13 am ] |
| Post subject: | Re: Jive turkey |
Fozzie wrote: :shock: No pictures and big $$$$$$ wtf!!!! I have noticed in the past that D&C thinks a awful lot of their stuff... |
|
| Author: | RGRMarketing [ Tue Apr 28, 2009 11:27 am ] |
| Post subject: | Re: Jive turkey |
You peepholes made any progress on this??? |
|
| Page 1 of 3 | All times are UTC - 8 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|