RumbleGoat Racing
http://www.rumblegoatracing.com/forum/

Jive turkey
http://www.rumblegoatracing.com/forum/viewtopic.php?f=93&t=1298		 Page 3 of 3
Author:  oltmann [ Sun May 03, 2009 11:04 am ]
Post subject:  Re: Jive turkey
Also, I'm still trying to give these away.... :lol:

Image

Image
Author:  Roman [ Sun May 03, 2009 11:07 am ]
Post subject:  Re: Jive turkey
KO, did you put a bend/kick at the frame in yours like the Lars Bars?

Also, why did you end up ditchin' these?

And I thought those were square tube from the first pic . . . :roll:
Author:  oltmann [ Sun May 03, 2009 12:02 pm ]
Post subject:  Re: Jive turkey
Not square, DOM.

They don't have a bend near the joint. Hadn't seen that done before.

I took these off when I swapped the d44 out for the d60. I built the new new arms that zig-zag to stay under the frame for tire clearance.
Author:  Roman [ Sun May 03, 2009 12:14 pm ]
Post subject:  Re: Jive turkey
So still radius arms? Or you go 3or4 link w/ trac bar or triangulated?
Author:  oltmann [ Sun May 03, 2009 12:18 pm ]
Post subject:  Re: Jive turkey
At first it was still radius arm. Now I'm 3 link with trac bar.

If/when I go v8 I'll most likely triangulate then.
Author:  Roman [ Tue May 05, 2009 7:18 pm ]
Post subject:  Re: Jive turkey
We got sent home early today (work was called on account of wind, really) but it let me head over to Tim's early. I got the welds on the driver side knocked out, next is the passenger side, and the shoulder bars.

Speaking of shoulder bars, Steve, take that tube you started notching and cut it for the front bar!!! :D


Are there Johnny Joints headed this way? 8-)
Author:  Fozzie [ Wed May 06, 2009 7:50 am ]
Post subject:  Re: Jive turkey
;) They are on the way
Author:  Fozzie [ Wed May 13, 2009 2:11 pm ]
Post subject:  Re: Jive turkey
:D Johnny joints are in!!!
Page 3 of 3 All times are UTC - 8 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/